aftertouch

[KeyKat88 at aol.com]

In a message dated 12/28/2006 9:47:00 PM Eastern Standard Time, 
KeyKat88 at aol.com writes:
Greetings, 

                 There is a way you can globally adjust the balance rail to 
make more aftertouch. At least that is what I did on a BAldwin Hamilton 
recently. There are 4 or 5 screws across the balance rail,  just under the b flats 
that adjust the entire balance rail's height, then there are stabilizing screws 
in between them, so that when you raise the balance rail you can then make the 
alternate screws hold them there at the desired height. You may not have to 
indivudually regulate. Get some more opinions on this, as I only did it once in 
my whopping 3 1/2 years experience, and probably am not explaining it as well 
as another can.  

Julia Gottshall
Reading, PA    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.ptg.org/pipermail/pianotech/attachments/20061228/6ac97f5c/attachment.html