Pinblock dilemma for a first timer.

[Ron Nossaman]

> I agree with you Ron N. I've done this many times. When a really thick 
> pin block is required, just glue and extra thickness of a hard timber on 
> the base of the pinblock blank before cutting it out (rock maple or 
> harder, ie. 0.7 gr/cc or denser). It will work very well. If its glued 
> and clamped on a flat surface, it will cure quite flat enough that it 
> can be fitted up to a plate and securely screwed.
> 
> Ron O.

Exactly.
Ron N