tearing bushing cloth

[William R. Monroe]

Thanks Ed,

Makes sense.  I'll pay better attention in the future (and save myself the 
anxiety).  ;-]

William R. Monroe
>
> Greetings,
>        Most large pieces of bushing cloth will have a cut edge and a torn
> edge.  If you examine it carefully, you will see which side should be 
> torn.
> What happened here is that you began tearing on the cut side and the cut 
> didn't
> follow the warp,(or woof) of the fabric.  You can tear that odd shaped 
> piece
> into thinner strips, leaving only one small triangular shaped edge if you 
> tear
> it again, starting 9mm from the previously torn edge you did.
> Regards,
> Ed Foote RPT