Pinblock/back separation repair

[Ron Nossaman]

> *I must admit, that some of the pianos, were high, and had to be tuned 
> down, when I finished drawing them together. Some came back to 
> reasonably close.*
> *But then again, I don't remember any I had, being open 3/4".*
> John M. Ross

Of the dozens I've done, I only remember dropping tension on 
one that, like Terry mentioned, had been repeatedly tuned as 
the gap widened to, in this case, about 1/2". The whole job 
takes about, or just under, an hour if the block is bare on 
top, and can be tuned at pitch immediately after.
Ron N