1943 Baldwin Acrosonic

[ITUNEPIANO at aol.com]

Is the height of the sticker rail correct?  If the rail is two low in  the 
bass, it may raise the hammers.  The rail is attached to the action  bracket 
with a screw that often loosens up.  Sometimes there is a nail or  pin to prevent 
the rail from moving if the screw is loose - sometimes not-  or maybe the  
pin has been removed.  I make it standard practice  to tighten these screws at 
time of tuning.  They are always  loose.   
 
Bob Maret,  RPT
Piano Technician




************************************** See what's new at http://www.aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.ptg.org/pipermail/pianotech/attachments/20071117/eafa82d3/attachment-0001.html