Flexy S&S D Keys
Richard Brekne
ricb at pianostemmer.no
Fri May 2 03:30:03 MDT 2008
Hi Del and Terry,
Terry, how did you ascertain that there was <<too much>> flex in the
keys ? Del, what is wrong with calling a spade a spade ? Honestly
folks... any <<improvement>> in an actions performance is wholly a
result of the users reaction to the change. There is no inherent
improvment.... only a change in configuration.
Thing is that for every person that would equate this change with an
<<improvement>> there are probably at least that many if not 10 times as
many who would not. You make the action stiffer when you make it
stiffer... goes without saying... if thats a good thing for the pianist
in question fine... if its not...what ...are we going to get all down on
the guy and snub our noses at him ?
Why not just call a change a change and leave it at that .... along with
making it clear to the customer what the change will do... pros and
cons. Because there is always pros and cons.
I'd like to know what the criteria for judging these particular keys to
have to much flex are ? Terry ?
Cheers
RicB
Have him or her go back to the August and December 1996 Journals and
read the
two articles I wrote about energy losses in piano actions. In one of
those
articles I described how to improve (I realize the idea of
"improving" anything
to do with the piano is subjective so perhaps I should just say
"change") these
keys.
Basically I removed the so-called Accelerated Action "rockers" and
replaced them
with normal thin felt punchings. I then used the space gained to
accommodate
maple plates of equal thickness (4 mm comes to mind but you should
check) glued
to the bottom of the keys. Did wonders to "change" the performance
of the action
and the piano.
Del
More information about the Pianotech
mailing list